Default Threshold Settings; Changing Default Threshold Settings - ACR Electronics PowerWatch Reference Manual

PowerWatch©
37
Impulse events
Sag events
Surge events
Outage events
Loss of Synchronization events
Ó 2007, ACR Systems Inc.
5.1.2.4

Default threshold settings

Default Threshold Settings
The PowerWatch program has factory-installed default threshold settings.
These settings are adequate for most applications.
Since there is a 110V
are provided. Connecting with a VDR will automatically use the appropriate
one.
To see the default threshold settings on the Status tab, click the Default
Settings button.
If you are concerned that some of your electronic equipment may have
particular power quality requirements, we suggest that you call the equipment
manufacturer for that information. You may discover that you should alter
some of the VDR's threshold settings in order to monitor power quality closer.
See also:

Changing Default Threshold Settings

ACR Systems Inc.
Ó 2007,
5.1.2.5 Changing default threshold settings
Changing Default Threshold Settings
If PowerWatch's default template threshold settings do not suit your
application, you may choose new settings and designate them as the default
settings.
1. Make your changes to the settings (on the Status tab of the Site Report
window).
2. Click the Save as Default Setup button.
VDR and a 220V VDR, two default threshold templates
2007 ACR Systems Inc.