Entering Ship Settings - ACR Electronics NAUTICAST AIS INLAND Manual

1.3

Entering Ship Settings

Select from the Main Menu "Ship Settings" Menu is USER password protected. The default
password from the factory is mentioned on your AIS display at the protection foil. (see Appendix
7.3 for password information). Enter Password and use the up and down arrows to edit Ship
Settings then press Enter or the numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
N 1
-----| |
View | +- 2. AIS Status
-----| +- 4. Ship Settings
Msg. | +- 6. Service Configuration
-----| +- 8. Graphical Display Settings
Displ|
----------------------------------------
NUM|Select->|
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
N/A
*********** Convoy Settings ************
Call Sign:OEZ1234
ShipName :INLAND SHIP
Ref.Points
Len (A+B):
Beam(C+D):
Len
Beam [dm]:
>>> DATA OK. PRESS M5 TO SAVE DATA <<<
----------------------------------------
Select and enter Call Sign (ATIS).
Select and enter Ship Name.
Enter external GPS Antenna Position
Enter internal GPS Antenna Position
Enter ship len and beam in [dm]
Setting the Internal and External GPS Antenna Position.
Note: It is critical for the proper orientation of your ship to other AIS users to enter this data
accurately.
Example: Length of ship = 220m and Beam = 43m.
8
o o
23' E 0 16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
| +- 1. Messages
| +- 3. Voyage Settings
| +- 5. Transponder Configuration
| +- 7. Display Settings
|
|
N/A |1> N/A|2> N/A|3> N/Anm
ext int
A: 200m 220m
B: 20m N/A
C: 10m 10m
D: 33m 33m
220m 220m
43m 43m
[dm]: 2199dm
429dm
| Save | |
|<-Back
/\ +
/ \|
| |
| A
| |
| +--|
| | B
| | |
+-C-+D-+
| Back
Y1-03-0211G