Sending The Setup To A Vdr - ACR Electronics PowerWatch Reference Manual

of events saved in the
collected.
If no events have been gathered, the words No Events Stored will be
displayed.
See also:
Threshold Settings
Realtime Readings
Operating Options
Site Description
Ó 2007, ACR Systems Inc.
5.1.2.10

Sending the setup to a VDR

Sending the setup to a PowerWatch
VDR
1. Place the wand into the optical port of the VDR.
2. If you have changed threshold settings or you are leaving the settings the
way they are, click Send Setup/Clear Logger button.
If you are changing the VDR's settings to the
Settings and then click Send Setup/Clear Logger button.
3. In the dialog box that appears, click Yes to confirm that all previous events
will be cleared from the VDR.
The new settings will be saved in the VDR.
4. Remove the Lite-Link wand from the VDR.
The VDR will begin monitoring when plugged into a standard convenience
outlet.
See also:
Retrieving events from a VDR
2007 ACR Systems Inc.
PowerWatch Operating Overview
VDR and the time span over which the data was
default settings, click Default
40