Retrieving And Saving Events; Retrieving Events From A Vdr - ACR Electronics PowerWatch Reference Manual

PowerWatch©
41
ACR Systems Inc.
Ó 2007,
5.1.3

Retrieving and Saving Events

Retrieving and Saving Events
· Retrieving events from a VDR
· Saving events
Site Report Window
· Dynamic Data Exchange (DDE)
Ó 2007, ACR Systems Inc.
5.1.3.1

Retrieving events from a VDR

Retrieving events from a VDR
1. With the Main PowerWatch window open, and with the Lite-Link connected
to your computer, ensure that the wand is blinking. If it is not, choose Scan
from the Communicate menu (or, on the ToolBar, click the red scan button so
that it flashes).
2. Place the wand into the VDR's optical port. The Site Report window will
open at the Status tab.
3. To download the VDR's stored events to your computer, click the Events
tab.
Downloading will start. During download the Cancel Download button (to the
right of the Scan button) will become activated enabling you to stop the
download. When all the VDR's events have been copied to your computer,
Downloading complete will appear on the status bar at the bottom of the Site
Report window.
4. Remove the wand from the VDR.
See also:
Saving Events
Ó 2007, ACR Systems Inc.
2007 ACR Systems Inc.