Table of Contents
Advertisement
- Displays a
- Displays a graphical representation of an
- Displays an
- Turns scanning on (blinking) or off (not blinking)
- Cancels the current downloading operation
- Displays this helpfile
For more information on each button, see its equivalent in the menu bar.
Ó 2007,
ACR Systems Inc.
4.1.5.3
ToolTips
ToolTips
A small descriptive tag that appears when the mouse pointer passes over a
button or text box. This tag contains help on using the button or text box.
Ó 2007,
ACR Systems Inc.
4.1.5.4
Calibration Utility
Calibration Utility
Use this function to adjust the calibration settings of the logger. Before
adjusting the logger's calibration, you will need a reliable AC power source
and a calibrated multimeter to verify the voltage of the AC source.
Use the Calibration window to adjust the calibration settings of the
PowerWatch. An illustration of the calibration window is displayed below:
Enter the voltage displayed by the multimeter into the Measured Voltage text
box.
The application enables the OK button once the following conditions are met:
*
The desired voltage is within a specific range of the current line voltage
2007 ACR Systems Inc.
Quick Summary
Event Distribution Graph
- Selects the current serial port
summarizing the events
impulse event
Menu Options
28
Advertisement
Table of Contents
