Opening The Site Report - ACR Electronics PowerWatch Reference Manual

PowerWatch©
35
Selecting a COM Port
With the PowerWatch main window open, from the Communicate menu
choose the COM port that the Lite-Link interface cable is connected to. When
you have connected the Lite-Link cable to your computer, you must, in the
PowerWatch program, choose that COM port.
The Communicate menu displays the available COM ports on your computer.
When you have chosen the correct port, the Lite-Link wand and the red
scanning button on the ToolBar will start to flash. When the wand is flashing it
is ready to communicate with a VDR. If the wand doesn't flash, please refer to
the Troubleshooting section of this guide.
Ó 2007, ACR Systems Inc.
5.1.2.2

Opening the Site Report

Opening the Site Report Window
1. With the main PowerWatch window open, the Lite-Link interface cable
connected to a COM port, and the red scan button flashing, point the Lite-Link
wand at the optical port of the VDR (from 12mm (0.5") away or closer) or plug
the wand directly into the VDR's recessed optical port.
The Site Report window will open.
2007 ACR Systems Inc.