Sound Adjustments; Adjusting The Sound - JVC GET0074-001A Instructions Manual

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
BAS
(bass)
VOL
(volume)
Indication To do:
BAS Adjust the bass.
TRE Adjust the treble.
FAD* Adjust the front
and rear speaker
balance.
BAL Adjust the left
and right speaker
balance.
LOUD Boost low and
high frequencies
to produce a
well-balanced
sound at low
volume level.
VOL Adjust the volume. 00 (min.)
* If you are using a two-speaker system, set the fader
level to "00."
22
Each time you press the
button, the adjustable items
change as follows:
TRE FAD
(treble) (fader)
BAL
LOUD
(balance)
(loudness)
Range
–06 (min.)
|
+06 (max.)
–06 (min.)
|
+06 (max.)
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
LOUD ON
|
LOUD OFF
|
50 (max.)
2
Adjust the level.
Note:
Normally, the control dial works as the volume
control. So you do not have to select "VOL" to adjust
the volume level.
To increase the level.
To decrease the level.
Equalization pattern
changes as you adjust
the bass or treble.