External Component Operations; Playing An External Component - JVC GET0074-001A Instructions Manual

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See "To select the external component to
use – EXT IN" on page 27.)
1
Select the external component
(LINE IN).
Press the button to select the
TAPE
external component.
• If "LINE IN" does not appear on the display, see
page 27 and select the external input ("LINE IN").
• Displayed only when one of the following
sources is selected – FM, AM or tape.
Note on One-Touch Operation:
When you press TAPE CD-CH, the power
automatically comes on. You do not have to press
to turn on the power.
32
TAPE
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics you
want. (See pages 22 – 24.)
Aux input