Tape Operations; Listening To A Cassette - JVC GET0074-001A Instructions Manual

Listening to a cassette

1
Open the control panel.
2
Insert a cassette into the cassette
compartment.
3
Close the control panel by hand.
4
Select the tape direction.
Each time you press 5 2 3,
the tape direction changes
alternately forward and
reverse.
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, select tape as the source by
pressing TAPE CD-CH to start tape play.
TAPE
The unit turns on and
tape play starts
automatically.
Tape–in indicator appears.

TAPE OPERATIONS

To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The source
changes to the previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can eject the cassette while the unit is turned
off by pressing 0.
To fast-forward and rewind a tape
To stop fast forward or rewind at any position
on the tape, press 5 2 3.
Tape play starts from that position on the tape.
Notes:
• When one side of the tape reaches its end during
play, the other side of the tape automatically starts
playing. (Auto Reverse)
• When the tape reaches its end while fast-forwarding,
the tape direction will be changed automatically.
Press ¢
for more
than 1 second to fast-
forward the tape.
When the tape reaches
its end, the tape is
reversed and playback
starts from the
beginning of the other
side.
Press 4
for more
than 1 second to rewind
the tape.
When the tape reaches its
end, playback of the
same side starts.
19