Tuning In To A Preset Station - JVC GET0074-001A Instructions Manual

3
Press and hold the number button (in
this example, 1) for more than 2
seconds.
Selected band/preset number
and "MEMO" (memory) appear
alternately for a while.
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.

Tuning in to a preset station

You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see "Storing stations in
memory" on pages 10 and 11.
1
Select the band (FM1 – 3, AM).
F1 F2
(FM 1) (FM 2)
2
Select the number (1 – 6) for the preset
station you want.
F3 AM
(FM 3)
11