How To Reset Your Unit; How To Use The Mode (M) - JVC GET0074-001A Instructions Manual

How to reset your unit

After detaching the control panel, press the reset button on the panel holder using a ball-point pen
or similar tool.
This will reset the built-in microcomputer.
Note:
• Your preset adjustments – such as preset channels or sound adjustments – will also be erased.

How to use the MODE (M):

If you press MODE (M), the unit goes into functions mode and the number buttons work as different
function buttons.
To use these buttons as number buttons again after pressing MODE (M), wait for 5 seconds
without pressing any number button until the functions mode is cleared.
• Pressing MODE (M) again also clears the functions mode.
2
Ex.: When you press button 5 to enter the RPT
function mode.