Tape Operations; Listening To A Tape; Finding The Beginning Of A Tune - JVC KS-FX440 Instructions Manual

TAPE OPERATIONS &a
Listening to a tape
Insert a cassette.
The unit turns on and tape play starts automatically.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
! Note on One-Touch Operation:
| When a cassette is already in the cassette compartment. pressing TAPE <@8 turns on the
© unitand starts tape play automatically.
Select the tape direction.
Each time you press the button, the tape direction changes
alternatively ~ forward (TAPE: +) and reverse (TAPE |').
= Turn on or off the Dolby B NR* as needed.
Each time you press the button, the Dolby B NR turns on
and off. (Only for KS-FX440)
TGLAY 3 = Sal
This indicator lights up when
the Dolby 8 NR is turned on.
To stop play and eject the cassette
Press &.
Tape play stops and the cassette automatically ejects from the cassette compartment.
if you change the source to AM/FM or CD changer, the tape play also stops (without ejecting
the cassette this time).
© You can also eject the tape with the unit turned off.
* Dolby Noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation. "DOLBY" and the double-D symbo! D0 are trademarks of Dolby Laboratories
Licensing Corporation.
ENGLISH
10
To fast-forward and rewind a tape :
* Press A »1 for more than 1 second to fast-forward the | f eg rae
tape.
When the tape reaches its end, the tape is reversed and
playback starts from the beginning of the other side.
"4
Tape direction
WF
¢ Press kt YW for more than 1 second to rewind the tape.
When the tape reaches its end, playback of the same side |
starts. 4
To stop fast-forward and rewind at any position on the tape, press TAPE <4.
Tape play starts from that position on the tape.
| Finding the beginning of a tune )
Multi Music Scan allows you to automatically start playback from the beginning of a specified
tune. You can specify up to 9 tunes ahead or before the current tune.
before the current tune the tune you
want is located.
To locate a tune
before the current
7—ssm— tune on the tape
hy.
VOW MA L se
few: ORES i G h4 on Pi (
'eS ss ce bat
To locate a tune '
L_-_ ahead of the current Each time you set the tune, the number changes
tune on the tape up to +9.
When the beginning of the specified tune is located, playback starts automatically.
Notes:
¢ While locating a specified tune:
— If the tape is rewound to its beginning, plavback starts from the beginning of that side.
— If the tape is fast forwarded to the end, it is reversed and plaved from the beginning of the other
side.
° Inthe following cases, the Multi Music Scan function may not operate correctly,
~ Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions
during tunes,
- Tapes with short non-recorded sections.
— Tapes with high level noise or humming berween tunes.
REM tt fe ie,
OvexXsA-Sm Ovrxs-Sy