Attaching To A Camcorder - Canon WFT-E6 Manual

Attaching to a Camcorder

Turn off the camcorder before attaching the WFT-E6 Wireless File Transmitter. The transmitter
is powered by the camcorder. Make sure the camcorder's battery pack is sufficiently charged
before using the transmitter.
Î
4
1
Turn off the camcorder.
2
Open the WFT terminal cover.
3
Attach the transmitter.
Align the transmitter's terminal to the camcorder's
WFT terminal as shown in the illustration and
firmly push it in ( ).
Turn the tightening screw in the direction of the
arrow until it stops to securely attach the
transmitter ( ).
#/$ You may find the WFT terminal
easier to access if you remove the camcorder's
grip unit.
4
Attach the supplied WFT Attachment
Bracket.
Position the bracket so it covers the transmitter's
attachment pin and tighten the screw.