Wi-Fi Protected Setup (Wps) - Button - Canon WFT-E6 Manual

Wireless file transmitter

Hide thumbs Also See for WFT-E6:

Table of Contents

Wi-Fi Protected Setup (WPS) - Button

Wi-Fi Protected Setup (WPS) is the easiest way to set up the Wi-Fi network. However, it may

not work correctly if there are several active access points in the area. In such case try using

the [WPS: Pin Code] (A 11) or [Connection Wizard] (A 12) option.

Open the [Set Up New] submenu.

[w Other Functions] > [Wi-Fi Remote] > [Set Up

New]

Select [WPS: Button] and then press

SET.

Press and hold the WPS button on the

wireless router.

The length of time required to hold down the WPS

button depends on the wireless router. Refer to the

instruction manual of your wireless router and

make sure the wireless router's WPS function is

activated.

Within 2 minutes, press SET on the

camcorder.

While [Connecting] appears on the screen, you

can press SET or the CANCEL button to cancel

the operation.

After the connection is correctly established,

continue with the procedure to configure the IP

address assignment (A 17).

Table of Contents