Camcorder Settings For Camcorders With Multi-User Support - Canon WFT-E6 Manual

Camcorder Settings for
Camcorders With Multi-User
Support
You can set a unique camcorder identification code and designate the port that the Wi-Fi
Remote application should use when accessing the transmitter through the Wi-Fi network. The
Wi-Fi connection will be disabled while you change these settings.
[Port No.]
[Camera ID]
[Port No.]
1 Push the joystick up/down or turn the SELECT dial to select a value for the first
field and then press SET to move to the next field.
2 After completing all the fields, select [Set] and press SET to enter the port number.
[Camera ID]
1 Use the joystick or turn the SELECT dial to select a character and then press SET
to add it.
Repeat this step as necessary to enter the desired text.
2 After entering the desired text, select [OK] and then press SET.
The port number (HTTP protocol) used by Wi-Fi Remote. This is
usually set to port 80, but you can change it if necessary.
Set a unique camcorder identification code that will appear on the
Wi-Fi Remote screen. This is convenient if you are using a multi-
camera shooting setup.
1
Open the [Camera Settings] submenu.
[w Other Functions] > [Wi-Fi Remote] > [Camera
Settings]
2
Select the desired setting and then
press SET.
3
Enter the desired value as described
below.
If necessary, repeat steps 2 and 3 to change both
settings. When you finish changing the settings,
select [L], press SET and then close the menu.
When you close the menu after changing the
camcorder's settings, the camcorder will reconnect
to the Wi-Fi network using the new settings.
19