Canon WFT-E6 Manual page 36

Changing Settings
Renaming the Configuration Profile
Each network configuration setup is stored under a configuration number ([No. 1] to [No. 5]).
You can rename it with a more familiar name to make it easier to distinguish between various
Wi-Fi networks you use.
36
7
If you selected [Manual], select a setting
you want to change and then press SET.
Push the joystick up/down or turn the SELECT dial
to select a value for the first field and press SET to
move to the next field. After completing the four
fields of each address, select [Set] and press SET
to enter the address.
Repeat this step to change other TCP/IP settings
as necessary. When you finish changing the
settings, select [L], press SET and then close the
menu.
For details about the network's settings, consult
the network administrator.
4
Select [Rename] and then press SET.
5
Select [Input] and then press SET.
Use the joystick or turn the SELECT dial to select
a character and then press SET to add it. Repeat
as necessary to enter the network configuration
name.
After entering the desired name, select [OK] and
then press SET.
6
Select [OK] and then press SET.