User Settings For Camcorders With Multi-User Support - Canon WFT-E6 Manual

Wireless file transmitter
Hide thumbs Also See for WFT-E6:
Table of Contents

Advertisement

User Settings for Camcorders
With Multi-User Support
A user name and password are required before the Wi-Fi Remote application (Wi-Fi enabled
device connected to the Wi-Fi network) can access the transmitter in order to operate the
camcorder. Depending on the camcorder used*, you can set up to three different users and
select whether you want to allow single-user operation (only User 1) or multi-user operation
(Users 2 and 3). The Wi-Fi connection will be disabled while you change these settings.
[User 1]
Can access all 3 Wi-Fi Remote screens: [Advanced Control], [Basic Control]
and [Metadata Input].
[User 2]
Can access only the [Advanced Control] screen. This would be the main
operator controlling the camcorder.
[User 3]
Can access only the [Metadata Input] screen. This would be the person in
charge of keeping the clip information up to date.
* Some camcorders are not compatible with multi-user operation. In that case, only one user can be set (A 22).
20
1
Open the [User Setting] submenu.
[w Other Functions] > [Wi-Fi Remote] > [User
Setting]
2
Select one of the [User Name] fields and
then press SET. Enter the user name as
described following this procedure.
3
Select the corresponding [Password]
field and then press SET. Enter the
password as described following this
procedure.
If necessary, repeat steps 2 and 3 to set up
additional users. When you finish setting up all the
users, select [L] and press SET.
4
From the same [Wi-Fi Remote]
submenu, select [Select User] and
press SET.
5
Select [User 1] (single-user operation)
or [Users 2&3] (multi-user operation),
press SET and then close the menu.

Advertisement

Table of Contents
loading

Table of Contents