Before installation, please make sure all of peripherals and
computers have been turned off.
This installation example is for KVM-U401. The KVM-U201 has the
similar installation procedure.
2.1 Windows 98/98SE user
When you apply Windows 98/98SE to USB KVM Switch, please use
the following set up procedures:
Step 1:
1. Connecting USB A-B type cables to PC and USB KVM
switch. The type A connector of USB cable is for PC and
the other end of USB cable is for USB KVM Switch. And
connecting HDDB15 pin (Male to Male) cables to PC and
USB KVM switch.
2. VGA monitor's cable is connected to console VGA port.
3. Connecting PS/2 keyboard to PC PS/2 keyboard port di-
rectly. Please do not connect PS/2 mouse to your PC and
PS/2 mouse & keyboard to USB KVM Switch.
Installation Procedure
Chapter 2
7