Windows Me/Xp/2000/Server 2003 User - Planet KVM-U201 User Manual

2. Power on all of PCs.

2.2 Windows Me/XP/2000/Server 2003 user

When you apply Windows Me/XP/2000/Server 2003 to USB KVM
Switch, please use the following set up procedure:
1. Connecting USB A-B type cables to PC* and USB KVM
Switch. The type A connector of USB cable is for PC and
the other end of USB cable is for USB KVM Switch.
2. Connecting HDDB15 pin (Male to Male) cables to PC and
USB KVM Switch.
3. VGA monitor's cable is connected to console VGA port.
4. Connecting keyboard and mouse to console PS/2 port.
5. Boot up all of PCs
6. If there have also SUN Microsystems on this USB KVM
Switch, please putting SUN Microsystems at 1st port of
this KVM switch and boot up SUN Microsystems again.
7. To add a power adapter to this KVM switch and power
on this switch first, then go the same boot up process
again.
*: MAC and Sun Micro Systems have the similar installa-
tion to mentioned-above PC installation process.
9