Table of Contents
Advertisement
4. Hardware Setup
A PDU can be installed in an indoor distribution box or on a wall. To install a
PDU in the above positions, use the fasteners and screws delivered with the
DEVICE to secure the PDU to a specific position.
4.1 Installation
To install a PDU, perform the following operations:
Step 1. Properly ground the PDU using ground cables. Connect one end of
the grounding cable to the grounding terminal and the other end to
the appropriate grounding object.
Step 2. For each group of devices to be connected, use their power cables
to connect the AC socket of the device to the available socket on the
PDU.
Step 3. Connect the cable that connects the PDU to the network connection
port of the PDU.
Step 4. Connect the PDU power cable to the AC power supply.
After connecting PDUs, power on PDUs and connected devices.
1. Do not omit Step 1. Proper grounding can avoid damage
caused by surge or static electricity.
2. Do not plug the PDU power cord into the extender of multiple
sockets to prevent it from being unable to get enough power
to operate properly.
3. It is strongly recommended that you use harness straps and
cable boxes to secure cables to the front panel of the equip-
ment. Prevent loose and poor contact in subsequent time.
7
Advertisement
Table of Contents
