Features For Recording; Self-Timer - JVC JY-HD10EK Instructions Manual

FEATURES FOR RECORDING

Self-Timer

Once the camcorder is set, the camcorder operator
can become part of the scene in a more natural way,
adding the final touch to a memorable picture.
1
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
● You can tilt the LCD monitor upward to 180°
so that it faces forward and view yourself while
self-recording with the viewfinder pushed
back.
3
Set "SELF-TIMER" to
"ON ". ( pg. 33, 35)
4
To engage the Self-Timer
for video recording, press
the Recording Start/Stop
Button.
● After 15 seconds, the
beep sounds and video
recording starts.
To stop Self-Timer
recording, press the
Recording Start/Stop
Button again.
● The camcorder re-enters
Record-Standby mode.
OR
4
Press SNAPSHOT.
● After 15 seconds, the beep sounds and
snapshot recording starts. After that, the
camcorder re-enters Record-Standby mode.
5
To end Self-Timer recording, select "OFF" in
step 3.
SNAPSHOT Button
Power Switch
Lock Button
MA NU L A
SE F L – T I ME R –
RETUR N
Self-Timer indication
NOTE:
If "BEEP" and "TALLY" are set to "OFF" (
the beep does not sound and the tally lamp does not
light.
(Self-Timer starts)
(Self-Timer shooting starts
Stops blinking and stays on
(Self-Timer video recording
(Self-Timer snapshot
recording occurs)
O F F
ON
When the Recording Start/
Stop Button or SNAPSHOT is
pressed, the tally lamp
changes as shown:
Begins blinking
Blinks quickly
soon)
After approx.
15 sec.
starts)
OR
Turns off
41
EN
pg. 36),