Flexible Card Wire; Removing/Reinstalling The Flexible Card Wires; Forming The Flexible Card Wire - Sony CCU-590 Maintenance Manual

3-8. Flexible Card Wire

n
Be careful not to bend the flexible card wires. This short-
ens the wire life.
3-8-1. Removing/Reinstalling the Flexible
Card Wires
Removal
1. Slide the portion * of the connector in the direction of
the arrow A to release the lock.
2. Remove the flexible card wire in the direction of the
arrow B.
Connector
*
A
Reinstallation
1. Hold the flexible card wire with its blue surface faced
upward, and insert it in the direction of the arrow A.
2. Slide the portion * of the connector in the direction of
the arrow B to lock it.
Connector
*
B
Blue surface
3-16
Flexible card wire
*
A
B
*
Flexible card wire
B
A

3-8-2. Forming the Flexible Card Wire

If using a new flexible card wire, hand form as shown in
the figure in advance.
n
Never reform the flexible card wire after being folded
once.
SW-1189 board CN1 5 5 5 5 MB-1011 board CN14 5
Insulated surface (Blue)
7.7 mm
12 mm
250 mm
Insulated surface (Blue)
SW-1189 board
(CN1)
MB-1011 board
(CN14)
25 mm
80 mm
CCU-590/P/V1(E)