Supplied Accessories; Adaptive Connectors And Cables; Connector Input/Output Signals - Sony CCU-590 Maintenance Manual

1-2. Supplied Accessories

Accessories
Remote indicator
!Power cord (for CCU-590)
With 3P-plug
Length: about 2.4 m
Rated voltage: 125 V
Rated current: 10 A
!Power cord (for CCU-590P)
Without plug
Length: about 2.5 m
Rated voltage: 250 V
Rated current: 10 A
Plug holder (for CCU-590)
(for CCU-590P)
CONNECTOR (PLUG)
Operation Manual
CCU-590/P/V1(E)
Sony Part No. Qt'y
A-8278-054-A 1
1-551-812-11 1
1-782-929-12 1
2-990-242-01 1
3-613-640-01 1
1-560-155-00 1
3-869-646-XX 1

1-3. Adaptive Connectors and Cables

1-3-1. Connector Input/Output Signals

The connector input/output signals are described below.
Rear panel
[Input signals]
REFERENCE (BNC)
*1
RET 1/2 (BNC)
*1
PROMPTER (BNC)
*2
SDI RET 3/4 (BNC)
*1: The same signal is input to the RET-2 connectors and the PROMPTER
connector.
*2: The signal selection (SDI or VBS) input to the SDI-RET 3/4 connectors
is switchable.
[Output signals]
*3
VBS/SDI 1/2/3 (BNC)
*4 (BNC) Y: 1.0 V p-p, 75 Z
Y/R-Y/B-Y video
*4
R/G/B video (BNC)
PIX (BNC)
WF (BNC)
SYNC (BNC)
*3: The signal selection (VBS or SDI) output from the VBS/SDI 1/2/3
connectors is switchable.
*4: R/G/B and Y/R-Y/B-Y are switchable.
VBS/BS, 1.0 V p-p, 75 Z
(loopthrough)
VBS, 1.0 V p-p, 75 Z
(loopthrough)
1.0 V p-p, 75 Z
(loopthrough)
VBS, 1.0 V p-p, 75 Z
(terminated internally)
SDI format, 270 M bps,
SMPTE259M
VBS, 1.0 V p-p, 75 Z
SDI format, 270 M bps,
SMPTE259M
R-Y/B-Y:
CCU-590: 700 mV p-p, 75 Z
CCU-590P: 525 mV p-p, 75 Z
700 mV p-p, 75 Z
1.0 V p-p, 75 Z
CCU-590: 714 mV p-p, 75 Z
CCU-590P: 700 mV p-p, 75 Z
Encoded output: 1.0 V p-p,
75 Z
0.3 V p-p, 75 Z
1-3