Disassembly/Assembly
Backup Battery
Disassembly
46
Figure 32. Removing the Main Board from the Chassis
4.
Most repairs to the main board can be performed without further disassembly of the
chassis. If it is necessary to replace the O-ring, remove the small O-ring retainers
from their slots in the chassis. Note the alignment of the retainers for reassembly.
5.
Remove the O-ring.
For this section, please refer to the Model III exploded view and parts list on page 35 for
part numbers and more information on the location of parts in the radio.
Table 18. Backup Battery Disassembly
Exploded
View
Motorola Part Number
Item
Number
23
4285633D01
26
6003710K08
1.
The backup battery can be removed without disassembling the board or the chassis.
2.
Remove the backup battery retaining clip by sliding it away from the main circuit
board, as shown in Figure 33.
3.
Insert a small, flat head screwdriver between the battery and the battery holder.
Gently pry the battery out of the battery holder.
Description
Retaining Clip
Battery, Backup