Step 1: Wall Panel Assembly - Cal Spas Gazebos Owner's Manual

Bayside Gazebo Assembly

Step 1: Wall Panel Assembly

Follow the written steps in conjunction with the figures that are shown.
1. Stand a wall panel and a corner up side by side. Attach the panels together using 4 drywall screws .
2. Repeat this step until all the panels are attached. The figure below shows the proper arrangement of panels.
The owner must use care when securing the wall panels and rounded corners together, as any damage incurred
during assembly is not covered by the warranty.
Be sure that the screws do not come in contact with the windows.
Page 4 2008 Gazebo Owner's Manual
LTR20081011, Rev. A