Operating Your Spa; Tp400 And Tp600 Control Panel Operation - Cal Spas Patio Owner's Manual

Operating Your Spa

TP400 and TP600 Control Panel Operation

Primary Navigation and Functions
Navigating and programming the entire menu structure
is done with 2 or 3 buttons on the control panel. During
normal operation, the control panel will show the actual
temperature of the water, as the control panels below
illustrate.
There are eleven settings, or menu items, you can
access in the control panel. To access them in order, start
by pressing the Warm or Cool button once. The Set
Temperature will start to flash. While the set temperature
is still flashing, press the Light button. This will take you
to the next menu item. Each time you press the Light
button, it will take you to the next screen.
The figures below show the order the menu items appear. Tap
each menu item to go to the section that explains its function.
Warm Cool
TP400 Control Panels
For one pump systems
For two pump systems
TP600 Control Panels
For two and three pump systems
For one pump systems
2017 Portable Spa
LTR20171000, Rev. C
Light Jets Aux
TEMP JETS AUX
To go through all menus:
(1) Press the
Temperature button
1
Press
1X
1X
2X
3X
4X
5X
6X
7X
8X
9X
10X
(2) Then press the
Light button.
2
Each time you
press the Light
button, it will
take you to the
next menu item.
Main screen
Adjust the set
temperature
Set temperature
ranges
Select heat mode
Set time of day
Flip (invert display)
Lock the display
(restrict operation)
Hold mode (standby)
Adjust ltration cycle 1
Adjust ltration cycle 2
Set personal
preferences
System utilities
(for diagnostics only)
www.calspas.com
9