Chapter 17 Configuration: System
Table 55 Configuration > System > Time (continued)
LABEL
Daylight Saving
Time Offset
Start Date
End Date
Apply
Cancel
17.3.2 The SNTP Server Screen
In the navigation panel, click Configuration > System > Time > SNTP Server to display the
screen as shown.
Figure 88 Configuration > System > Time > SNTP Server
The following table describes the labels in this screen.
Table 56 Configuration > System > Time > SNTP Server
LABEL
SNTP Server
Server Address
Server Port
Apply
Cancel
17.4 Information
The information option is used to set the following system information properties: system name,
system location, and system contact information.
96
DESCRIPTION
Enter the daylight saving time offset value in minutes.
Select the start date of the daylight saving time period from the dropdown lists.
Select the end date of the daylight saving time period from the dropdown lists.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Enter the address of the simple network time protocol (SNTP) server as an IP address
(192.168.0.1) or as a URL (www.zyxel.com).
Enter the port number of the SNTP server. The numeric value can be between 1 and 65535.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide