Audio Dubbing - JVC GR-DVM828 Instructions Manual

68
EN

Audio Dubbing

The audio track can be customized only when recorded on the 32 kHz mode (
NOTES:
Audio Dubbing is not possible on a tape recorded at 48 kHz, on a tape recorded in the LP mode or on a
blank portion of a tape.
To perform Audio Dubbing while watching in the television, make connections (
Remote sensor
1 FIND EDIT-IN POINT
Play back the tape to locate the point where
editing will start, then press PAUSE.
2 ENGAGE AUDIO DUB STANDBY
While holding A. DUB on the remote control,
press PAUSE. "6e" appears.
6e
Audio Dub Standby
External stereo
microphone
input connector
Connector is
under the cover.
Stereo microphone
AV OUT
(headphones)
connector
T W
3 BEGIN DUBBING
Press PLAY, then begin "narrating".
•Speak into the microphone.
4 PAUSE DURING DUBBING
Press PAUSE.
5 STOP DUBBING
Press STOP.
EDITING
(Cont.)
pg. 34).
pg. 54 – 57).
Power Dial
Speaker
DISPLAY
AUDIO MONITOR
A.DUB
PLAY
PAUSE
STOP