JVC GR-DVM828 Instructions Manual page 41

P.AE/Effects
IMPORTANT:
If certain Fades or Wipes (
P.AE/Effect that is unusable in the current situation, the effect's symbol begins flashing.
You can choose any one of the effects (
FOCUS
EXPOSURE
W. BALANCE
FADER
/ WIPE
4 P. AE
/ EFFECT
RETURN
Manual Mode Item Menu
Select Dial
1 SELECT OPERATION MODE
First turn the Power Dial to " " while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2
ACCESS MANUAL MODE ITEM
MENU
Press the Select Dial and move the pointer and
highlight bar to "P.AE/EFFECT" by rotating the
Select Dial.
3
ACCESS P.AE/EFFECT SELECT MENU
Press the Select Dial. The P.AE/Effect Menu
appears.
pg. 39, 40) are activated, some P.AE/Effects cannot be used. If you select a
pg. 42) from the P.AE/Effect Menu.
P. AE / EFFECT
AUTO
AUTO
AUTO
OFF
SEL. 4
OFF
Display
1 SLOW X4
2 SLOW X10
OFF
1/50 SHUTTER 1/50
SHUTTER
1/100 1/100
1/250 SHUTTER 1/250
1/500 SHUTTER 1/500
P.AE/EFFECT Menu
4 SELECT EFFECT
Move the pointer and highlight bar to the
desired effect by rotating the Select Dial, then
press it.
•The P.AE/Effect Menu disappears and the
selected mode is activated. The symbol of the
selected mode appears.
5
START RECORDING
Press START/STOP. The image begins with the
selected effect.
6
DISABLE P.AE/EFFECT
To turn off the selected effect, re-access the
P.AE/Effect Menu and move the pointer and
highlight bar to "OFF" by rotating the Select
Dial. Then press it.
NOTE:
P.AE/Effects can be changed during recording or
during Record-Standby.
1/50 PAUSE
The indicator for the selected
mode appears, and the
selected mode is engaged.
Lock button
Power Dial
41
EN