JVC GR-DVM828 Instructions Manual page 30

30
EN
Menus
The Recording Menu allows you to set these functions:
Recording Mode, Wide Mode, Zoom Magnification, Digital Image Stabilizer, Gain Up, Date/Time Menu,
System Menu . The following selection procedure applies to Recording Mode, Wide Mode, Zoom Magnifica-
tion, Stabilization and Gain Up .
Please refer to pages 31, 32 for details.
Display
4
REC MODE
WIDE MODE
ZOOM
DIS
GAIN UP
TO DATE / TIME MENU
TO SYSTEM MENU
END
Recording Menu
REC MODE
WIDE MODE
ZOOM
DIS
GAIN UP
TO DATE / TIME MENU
TO SYSTEM MENU
4 END
1
SELECT OPERATION MODE
First turn the Power Dial to " " while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2 ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3 SELECT FUNCTION
Move the pointer and highlight bar to the
desired function by rotating the Select Dial,
then press it. The pointer stops blinking,
indicating that the function has been selected.
SP
OFF
40X
ON
AGC
SP
Select Dial
OFF
40X
ON
AGC
RECORDING
4
SET FUNCTION PARAMETERS
Cycle the available settings of the selected
function by rotating the Select Dial. Stop when
the one you need is displayed. Then press it,
and the pointer and highlight bar automatically
move to "END".
•To set the parameters for a different function,
repeat steps 3 and 4.
5
CLOSE RECORDING MENU
Press the Select Dial. Selection is complete and
the menu disappears.
Advanced Features (Cont.)
Lock button
Power Dial
MENU button