Random Assemble Editing - JVC GR-DVM828 Instructions Manual

Random Assemble Editing

Using the remote control, you can use P.AE/Effects and make an original edited tape.
To EDIT connector
To S-VIDEO OUT connector
1
MAKE CONNECTIONS
Make sure that the playback picture and sound
are available on the connected TV (
•Connections should be made while the power
is off. Making connections with the power on
can lead to electrical shock or malfunctions.
2
START SOURCE PLAYBACK
First turn the Power Dial to "PLAY" while
pressing down the lock button located on the
dial. Press PLAY and then press R.A. EDIT ON/
OFF on the remote control. Make sure to point
the remote control at the camcorder's remote
sensor.
•The Random Assemble Editing Menu appears
on the TV screen or the LCD monitor.
3
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE on the remote control.
•Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
•You can't use a Picture Wipe/Dissolve at the
beginning of Program 1.
Core
filter
VIDEO/
AUDIO cable
(provided)
Red to AUDIO R
White to AUDIO L
Core
filter
Yellow to VIDEO
Core
filter
Remote sensor
Source tape
(Camcorder)
New tape
(VCR)
pg. 56).
Editing cable
To remote
(provided)
pause
connecter
White to AUDIO L
Red to AUDIO R
Yellow to VIDEO
S-VIDEO cable
(provided)
NOTES:
When using a JVC VCR with a remote pause
terminal, connect the EDIT connector on the AC
Charger Station to the VCR's remote pause
terminal using an editing cable.
If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the AC
Charger Station's EDIT connector to the remote
control's remote pause connector using an editing
cable.
Before Random Assemble Editing, make sure the
indications don't appear on the TV monitor. If
they appear during Random Assemble Editing,
they will be recorded onto the new tape. To clear
the Playback Sound Mode Display, press
DISPLAY on the remote control. Select "DISPLAY"
and "TIME CODE" from the Playback Menu
( pg. 52) to show or hide the Date/Time and
the Time Code on the recording. To show or hide
all indications except for the Random Assemble
Editing Menu, press IND. ON/OFF on the
camcorder for longer than 1 second. When
Random Assemble Editing starts, its indications
disappear and are not recorded on the new tape.
EN
DISPLAY
T W
PLAY
FADE/WIPE
R.A. EDIT
ON/OFF
VCR
(Recording deck)
CONTINUED ON NEXT PAGE
63