JVC GR-DVM828 Instructions Manual page 33

System Menu
The System Menu allows you to set the following functions: Photo Mode, Scene, Beep/Tally, Wind Cut,
Sound Mode, ID numbers and Demonstration Mode (
Display
REC MODE SP
WIDE MODE OFF
ZOOM 40X
DIS ON
GAIN UP AGC
TO DATE / TIME MENU
4 TO SYSTEM MENU
END
Recording Menu
PHOTO MODE FRAME
SCENE 5S
BEEP / TALLY ON
WIND CUT OFF
SOUND MODE 32kHz
ID NUMBER 06
DEMO. MODE OFF
4 RETURN
System Menu
1 SELECT OPERATION MODE
First turn the Power Dial to " " while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2 ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3 ACCESS SYSTEM MENU
Move the pointer and highlight bar to "TO
SYSTEM MENU" by rotating the Select Dial,
then press it. The System Menu appears.
4 SELECT FUNCTION
Move the pointer and highlight bar to the
desired function by rotating the Select Dial,
then press it. The pointer stops blinking,
indicating that the function has been selected.
pg. 34).
Select Dial
5 SET FUNCTION PARAMETERS
Rotate the Select Dial to cycle through the
available settings for the selected function, and
stop when the desired setting appears. Then
press it, and the pointer and highlight bar
automatically move to "RETURN".
•To set the parameters for a different function,
6
CLOSE SYSTEM MENU
Press the Select Dial twice. Setting is complete
and the System Menu disappears.
MENU button
repeat steps 4 and 5.
33
EN
Lock button
Power Dial