Demonstration - JVC GR-DVL817 Instructions Manual

6
EN
Automatic Demonstration takes place when "DEMO MODE"
is set to "ON" (factory-preset).
Available when the Power Switch is set to "
no cassette is in the camcorder.
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is performed
for more than 1 minute after that, the demonstration will
resume.
"DEMO MODE" remains "ON" even if the camcorder
power is turned off.
To cancel Automatic Demonstration:
1. Set the Power Switch to "
Lock Button located on the switch and press the MENU/
BRIGHT wheel in. The Menu Screen appears.
2. Rotate the MENU/BRIGHT wheel to select "
and press it. The SYSTEM Menu appears.
3. Rotate the MENU/BRIGHT wheel to select "DEMO
MODE" and press it. The Sub Menu appears.
4. Rotate the MENU/BRIGHT wheel to select "OFF" and
press it.
5. Rotate the MENU/BRIGHT wheel to select "1RETURN",
and press it twice. The normal screen appears.
NOTE:
If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor or viewfinder.
How To Attach The Lens Cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is flush to the camera.
1
AUTOMATIC DEMONSTRATION
" while pressing down the
2
" or " " and
SYSTEM"
GR-DVL817 only
3
MENU/BRIGHT Wheel
Lock Button
Power Switch
Sub Menu
DEMO MODE – OF F
ON