JVC GR-DVL817 Instructions Manual page 49

DEMO OFF
MODE
ON
SIDE LED
ON
OFF
CAM CANCEL
RESET
EXECUTE
ON
LCD
SCREEN
LCD/TV
DATE/
OFF
TIME
AUTO
ON
TIME OFF
CODE
ON
CLOCK ADJ.
(GR-DVL817 only)
Allows you to set the Picture Quality mode (FINE and STANDARD) depending on your
QUALITY
preference (
REC
SELECT
: Factory-preset
NOTES:
" SYSTEM" and "
when the Power Switch is set to "
" ".
The " DISPLAY" settings are effective even when the Power Switch is set to "
The "ON SCREEN" setting can also be changed by pressing the DISPLAY Button on the remote control (provided
with GR-DVL817 only) (
Automatic demonstration will not take place.
Demonstrates certain functions such as Program AE with special effects, etc.,
and can be used to confirm how these functions operate. When "DEMO
MODE" is set to "ON" and the Menu Screen is closed, demonstration starts.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 1 minute after that,
the demonstration will resume.
NOTES:
If a tape is in the camcorder, the demonstration cannot be turned on.
"DEMO MODE" remains "ON" even if the camcorder power is turned off.
If "DEMO MODE" remains "ON", some functions will not be available.
After viewing demo, set to "OFF".
The Side LED indicator (
Power Switch is set to "
Does not reset all settings to the factory-preset.
Resets all settings to the factory-preset.
Keeps the camcorder's display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder's display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
•When the Power Switch is set from "OFF" to "
•When video playback starts. The camcorder displays the date/time when
scenes are recorded.
•When the date is changed during video playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time (
pg. 14).
When Snapshot recording is performed with the VIDEO/DSC Switch set to
"VIDEO", still images are recorded only onto the tape.
When Snapshot recording is performed with the VIDEO/DSC Switch set to
/
"VIDEO", still images are recorded not only onto the tape but also in the
memory card.
DISPLAY" functions which are set when the Power Switch is set to "
" ( pg. 50). "CLOCK ADJ." only appears when the Power Switch is set to
pg. 23, 52, 62).
p. 78, 79) lights on the camcorder when the
" or " ".
pg. 11).
".
49
EN
" or " ".
" are also applied