Table of Contents
Advertisement
DIGITAL VIDEO CAMERA
GR-DVL817
GR-DVL517
GR-DVL515
GR-DVL317
Please visit our Homepage on the World Wide Web and
answer our Consumer Survey (in English only):
http://www.jvc-victor.co.jp/english/index-e.html
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No. which is located on the
bottom of cabinet. Retain this information for future reference.
Model No.
Serial No.
CONTENTS
AUTOMATIC
DEMONSTRATION
GETTING STARTED
VIDEO RECORDING &
PLAYBACK
VIDEO RECORDING ............ 16 – 20
VIDEO PLAYBACK .............. 21 – 24
DIGITAL STILL CAMERA (D.S.C.)
RECORDING &
PLAYBACK
D.S.C. RECORDING ............ 26 – 27
D.S.C. PLAYBACK .............. 28 – 36
ADVANCED
FEATURES
FOR RECORDING ................ 38 – 45
USING THE MENU FOR
DETAILED ADJUSTMENT ...... 46 – 51
DUBBING ......................... 52 – 55
USING THE REMOTE
CONTROL UNIT ................ 56 – 67
SYSTEM CONNECTIONS ........ 68 – 69
REFERENCES
DETAILS ................................... 71
TROUBLESHOOTING ............ 72 – 76
USER MAINTENANCE ................... 77
INDEX ............................. 78 – 84
CAUTIONS ........................ 85 – 87
TERMS ............................ 88 – 89
SPECIFICATIONS ................. 90 – 91
The D.S.C. (Digital Still Camera) features
are available on GR-DVL817.
LYT0711-001A
ENGLISH
6
7 – 14
15 – 24
25 – 36
37 – 69
70 – 91
EN
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for JVC GR-DVL817
Summary of Contents for JVC GR-DVL817
-
Page 1: Digital Video Camera
TROUBLESHOOTING ... 72 – 76 USER MAINTENANCE ... 77 INDEX ... 78 – 84 CAUTIONS ... 85 – 87 TERMS ... 88 – 89 SPECIFICATIONS ... 90 – 91 The D.S.C. (Digital Still Camera) features are available on GR-DVL817. LYT0711-001A ENGLISH 7 – 14... -
Page 2: Safety Precautions
However, live recording and LCD monitor/viewfinder playback are possible anywhere. Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.) -
Page 3: Important Safety Instructions
When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes. - Page 4 CAUTION! Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving the unit on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage. This camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard.
-
Page 5: Provided Accessories
•Audio/Video Cable (ø3.5 mini-plug to RCA plug) • PC Connection Cable (GR-DVL517/DVL515 only) NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. •Remote Control Unit RM-V716U (GR-DVL817 only) •Lens Cap (... -
Page 6: Demonstration
LCD monitor or viewfinder. How To Attach The Lens Cap To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. NOTE: To confirm the lens cap is on correctly make sure the cap is flush to the camera. -
Page 7: Table Of Contents
Viewfinder Adjustment ... 10 Shoulder Strap Attachment ... 10 Tripod Mounting ... 10 Date/Time Settings... 11 Loading/Unloading A Cassette ... 12 Recording Mode Setting ... 13 Loading A Memory Card ... 14 (GR-DVL817 only) Picture Quality Mode Setting ... 14 (GR-DVL817 only) -
Page 8: Power
2 hrs. BN-V428U (optional) approx. 3 hrs. 20 min. Power This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK... -
Page 9: Using The Battery Pack
AA-V15U AC Power Adapter/Charger for BN-V840U battery pack and only AA-V80U AC Power Adapter/Charger for BN-V856U battery pack. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect the BN-V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder. -
Page 10: Grip Adjustment
Confirm the strap is not twisted. Tripod Mounting CAUTION: When attaching the camera to a tripod, extend its legs to stabilize the camcorder. It is not advised to use small sized tripods. This may cause damage to the unit by falling over. -
Page 11: Date/Time Settings
W I PE FADER OF F PROGR AM AE W. BAL AN E CAMER MANUA SYSTE D I SPL GR-DVL817 only DISPLAY Menu ON SC RE N – LCD / TV DATE / I ME – T I ME CODE –... -
Page 12: Loading/Unloading A Cassette
If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again. When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover. -
Page 13: Recording Mode Setting
It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder. During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound. ” while pressing down... -
Page 14: Loading A Memory Card (Gr-Dvl817 Only)
36. ATTENTION: Do not insert/remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause the camcorder to become unable to recognize whether or not the card is installed. - Page 15 VIDEO RECORDING & PLAYBACK VIDEO RECORDING & PLAYBACK CONTENTS VIDEO RECORDING ... 16 – 20 Basic Recording ... 16 Journalistic Shooting ... 17 Self-Recording ... 17 Operation Mode ... 17 Zooming ... 18 Video Light ... 19 Time Code ... 20 VIDEO PLAYBACK ...
-
Page 16: Video Recording
During Press in the tabs on the lens cap to remove it. shooting GR-DVL817 only: Press PUSH OPEN, open the LCD monitor and set the VIDEO/DSC Switch to “VIDEO”. Set the Power Switch to “ down the Lock Button located on the switch. -
Page 17: Journalistic Shooting
(GR-DVL517/DVL515/DVL317 only). • Allows you to display a still image stored in the memory card or to transfer a still image stored in the memory card to a computer (GR-DVL817 only). ”, “ ” ”, there is no VIDEO: Allows you to record on a tape or play back a tape. -
Page 18: Zooming
Zoom in (T: Telephoto) 1 x W 10 x W 20 x W Zoom out (W: Wide angle) Zoom display 10 x W Approximate zoom ratio Power Zoom Lever VIDEO RECORDING FEATURE: PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. -
Page 19: Video Light
30 cm (11-13/16") between the video light and people or objects. Do not use near flammable or explosive materials. It is recommended that you consult your nearest JVC dealer for replacing the video light. Video Light FEATURE: PURPOSE: To brighten the scene when natural lighting is too dim. -
Page 20: Time Code
When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape”... -
Page 21: Video Playback
2) Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse Frame-By-Frame Playback during Still Playback. To resume normal playback, press 4/6. If you are using the GR-DVL817, you can also use the provided remote control for Frame-By-Frame Playback pg. 59). Slow-Motion Playback/Playback Special Effects (GR-DVL817 only) and... -
Page 22: Connections
If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder. * When connecting the cables, open this cover. ** The Audio cable is not required for watching still images only. - Page 23 The S-Video cable is optional. Be sure to use the pg. 22). YTU94146A S-Video cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder.
-
Page 24: Blank Search
( Load a tape ( pg. 12). Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL817 only), then set the Power Switch to “ pressing down the Lock Button located on the switch. - Page 25 DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK The D.S.C. (Digital Still Camera) features are available on GR-DVL817. CONTENTS D.S.C. RECORDING ... 26 – 27 Basic Shooting (Snapshot) ... 26 – 27 D.S.C. PLAYBACK ... 28 – 36 Normal Playback ... 28 Auto Playback ...
-
Page 26: D.s.c. Recording
Appears during shooting and blinks when a memory card is not loaded. Shooting icon Appears and blinks during shooting. Basic Shooting (Snapshot) You can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: You should already have performed the procedures listed below. - Page 27 If shooting is not performed for approx. 5 minutes when the Power Switch is set to “ ” or “ supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, set the Power Switch to “OFF”, then to “ ” or “...
-
Page 28: D.s.c. Playback
These thumbnail images cannot be transferred to a PC. Images shot with devices that are not compatible with DCF cannot be viewed with this camcorder; “Unsup- ported Data!” will be displayed. Directory and File names Displays the directory and file names. -
Page 29: Index Screen
Picture quality Index number Selected image < > E X I T I N D E X 100-DVC00003 Protect icon MENU/BRIGHT Wheel Display V I DEO I NDEX Menu Screen SYSTE PROTE D I SPL DELE E MEMOR DPOF FORM Playback Screen INDEX Screen The images you shot can be displayed together with their... -
Page 30: Jump Playback
MENU/BRIGHT Wheel JUMP Button Display JUMP MENU 10 / 50 / SET Index number Jump Playback When viewing still images stored in a memory card, you can call up directly an image you want to view by specifying its index number. Press JUMP during Normal Playback ( The Jump Screen appears. -
Page 31: Protecting Images
MENU/BRIGHT Wheel Lock Button Power Switch VIDEO/DSC Switch (Open the LCD monitor to access this switch) Display Menu Screen I NDEX PROTECT DELET DPOF FORM RETUR < > E X I T P R O T E C T PROTECT Index Screen Normal playback If Protection... -
Page 32: Deleting Images
MENU/BRIGHT Wheel Lock Button Power Switch VIDEO/DSC Switch (Open the LCD monitor to access this switch) Display < > NEXT D E L E T E DELE E SE ECT – CANCEL EXECUT E Deleting Images Previously shot images can be deleted either one at a time or all at once. - Page 33 Check images before deleting. CAUTION: Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion.
-
Page 34: Setting Print Information
CANCEL EXECUTE Setting Print Information (DPOF Setting) This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make). - Page 35 MENU/BRIGHT Wheel Display < > NEXT D P O F DPOF Screen 100-DVC00021 DPOF Confirmation Screen SE ECT – CANCEL EXECUTE TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS Perform steps 1 through 3 on pg. 34. Rotate the MENU/BRIGHT wheel to selsect “SELECT” and press it.
-
Page 36: Initializing A Memory Card
CAUTION: Menu Screen Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted initialize it. -
Page 37: Features
Dubbing To Or From A Video Unit With A DV Connector ... 53 Dubbing Images Stored In A Memory Card To A Tape ... 54 (GR-DVL817 only) Dubbing Images Recorded On A Tape To A Memory Card ... 55 (GR-DVL817 only) Installing The Batteries/Installing The Battery ... -
Page 38: For Recording
MONOT CLASS I C F I LM STROB GR-DVL817 only Night-Alive Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed. - Page 39 45) is initially set to but can be changed to your desired setting. When Twilight is chosen, the camcorder automatically adjusts the focus from approx. 10 m (32 ft) to infinity. From less than 10 m (32 ft), adjust the focus manually.
-
Page 40: Fade/Wipe Effects
Fade or Wipe works when video recording is started or when you stop recording. Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL817 only), then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. - Page 41 Fader And Wipe Menu Menu FADER — WHITE FADER — BLACK FADER — B.W MOSAIC WIPE — CORNER WIPE — WINDOW WIPE — SLIDE WIPE — DOOR WIPE — SCROLL WIPE — SHUTTER DISSOLVE WIPE — CORNER WIPE — WINDOW WIPE —...
-
Page 42: Snapshot (For Video Recording)
This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL817 only), then set the Power Switch to “ down the Lock Button located on the switch. -
Page 43: Auto Focus/Manual Focus
FEATURE: PURPOSE: The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm (2") to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): •When two subjects overlap in the same scene. -
Page 44: Exposure Control
To Return To Automatic Exposure Control ..press EXPOSURE twice or set the Power Switch to “ ”. (If EXPOSURE is pressed once, the camcorder will enter the exposure adjustment mode again.) To Brighten The Subject Quickly ..press BACKLIGHT. -
Page 45: White Balance Adjustment
If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional color/tint reproduction. Set the Power Switch to “... -
Page 46: Using The Menu For Detailed Adjustment
Some menu items may not be unavailable on your model. For Recording Menu This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( Set the Power Switch to “... - Page 47 •When shooting scenes with movement in various directions. •When shooting scenes with low-contrast backgrounds. Switch off this mode when recording with the camcorder on a tripod. The “ ” indicator blinks or goes out if the Stabilizer cannot be use pg.
- Page 48 WIND BEEP BEEP MELODY TALLY This number is necessary when connecting the camcorder to a device such as a computer NUMBER using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06. (GR-DVL517/ DVL515/ DVL317 only)
- Page 49 The date/time is always displayed. Time code is not displayed. TIME CODE Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. Allows you to set the current date and time ( CLOCK ADJ.
-
Page 50: For Playback Menu
12BIT MODE SYNCHRO MELODY REC MODE COPY (GR-DVL817 only) NOTES: It is also possible to change the ON SCREEN settings by pressing DISPLAY on the remote control (provided with GR-DVL817 only). “REC MODE” can be set when the Power Switch is set to “... -
Page 51: Playback Sound
28 – 36 (GR-DVL817 only) PLAYBACK SOUND During video playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. -
Page 52: Dubbing
The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference. -
Page 53: Dubbing To Or From A Video Unit With A Dv Connector
STOP (5) To Use This Camcorder As A Recorder . . . 1. Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL817 only), then turn the Power Switch to “ pressing down the Lock Button located on the switch. 2. Set “REC MODE” to “SP” or “LP” in the Menu Screen ( 3. -
Page 54: Dubbing Images Stored In A Memory Card To A Tape (Gr-Dvl817 Only)
“ ” DUBBING Dubbing Images Stored In A Memory Card To A Tape (GR-DVL817 only) Images can be dubbed from a memory card to a tape. Load a memory card ( pg. 14) and cassette pg. 12). To locate the point where you wish to dub a still image, play back the tape. -
Page 55: Dubbing Images Recorded On A Tape To A Memory Card (Gr-Dvl817 Only)
(Open the LCD monitor to access this switch.) Dubbing Images Recorded On A Tape To A Memory Card (GR-DVL817 only) Images can be dubbed from a tape to a memory card . Load a memory card ( pg. 14) and cassette pg. -
Page 56: Using The Remote Control Unit
Remote sensor USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. - Page 57 Zoom in/out ( pg. 18) — — — — — — — — — Functions the same as the Recording Start/Stop Button on the camcorder. — Functions the same as SNAPSHOT on the camcorder. — — — — — — — —...
- Page 58 (“ ” or “ ”) . Transmits the beam signal. Zoom in/out ( pg. 18) — — — — Functions the same as the Recording Start/Stop Button on the camcorder. — — — — — — — RM-V700U (optional) Functions With the camcorder’s Power Switch set...
-
Page 59: Slow-Motion Playback (Gr-Dvl817 Only)
OPERATION: 1) To start playback, press PLAY (4). 2) Point the remote control at the camcorder's remote sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears. 3) Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after 2 seconds the menu disappears. -
Page 60: Playback Zoom
Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in. 3) For GR-DVL817 Owners: You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT, press... -
Page 61: Set Remote/Vcr Code
You are now ready to try Random Assemble (A) (B) Editing. IMPORTANT Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions. NOTES: If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST. -
Page 62: Make Connections
• YTU94146A S-Video cable. • YTU94154A Editing cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. - Page 63 RM-V700U recently registered point. (optional) • For GR-DVL817 Owners: If you are not using Fade/ Wipe or Program AE with special effects, repeat steps 6 and 7 only. pg. 59). CONTINUED ON NEXT PAGE...
-
Page 64: Random Assemble Editing
(Provided with GR-DVL817 only) AUTOMATIC EDITING TO VCR Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (6). Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (q6), or manually engage the VCR’s Record-Pause mode. -
Page 65: For More Accurate Editing
Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. -
Page 66: Audio Dubbing
Make sure you only edit recorded areas. If feedback or howling occurs during TV playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume. If you change from 12-bit to 16-bit in mid-recording and then use the tape for Audio Dubbing, it is not effective from the point where 16-bit recording began. -
Page 67: Insert Editing (Gr-Dvl817 Only)
INSERT PLAY STOP PAUSE Insert Editing (GR-DVL817 only) You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. The original audio remains unchanged. -
Page 68: System Connections
Make sure the camcorder and PC are turned off. Connect the camcorder to your PC using the appropriate cable as shown in the illustration. For GR-DVL817 Owners: If you are using the USB connection, set the VIDEO/DSC switch to “DSC”. -
Page 69: Connection To A Video Unit With A Dv Connector
Also refer to the instruction manuals of the connected units. When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable. When using a cable supplied with a core filter, be sure to connect the end with the core filter to the camcorder. -
Page 70: References
REFERENCES CONTENTS DETAILS ... 71 TROUBLESHOOTING ... 72 – 76 USER MAINTENANCE ... 77 INDEX ... 78 – 84 Controls, Connectors And Indicators ... 78 – 79 Indications ... 80 – 84 CAUTIONS ... 85 – 87 TERMS ... 88 – 89 SPECIFICATIONS ... -
Page 71: Details
Be sure to use it only in well-ventilated areas. The following operation stops charging: Set the Power Switch to “ • Disconnect the AC adapter from the camcorder. • Unplug the AC adapter from the AC outlet. •... -
Page 72: Troubleshooting
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes;... - Page 73 Edit-In and Edit-Out points, as they will all be erased ( pg. 40). • The camcorder automatically shuts off after 5 minutes have elapsed in the Record- Standby mode. Make sure you continue operations within 5 minutes after engaging Record-Standby mode pg.
- Page 74 SYMPTOM 16. The picture wipe function does not work. 17. Scene transition does not go as expected. 18. The Video Echo mode does not work. 19. Even when Slow Shutter is not selected, the image looks like it is activated. 20.
- Page 75 LCD monitor become dark. Consult your nearest JVC dealer. 28. • The light used to illuminate the LCD monitor causes it to become hot. 29. • This may occur when the surface or the edge of the LCD monitor is pressed.
-
Page 76: Troubleshooting
If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. 41. • To protect the battery, it is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F) -
Page 77: User Maintenance
USER MAINTENANCE After Use Turn off the camcorder. Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette. Press “PUSH HERE” to close the cassette holder. -
Page 78: Index
INDEX Controls, Connectors And Indicators 3 4 5 6 7 &... -
Page 79: Other Parts
26, 27, 42, 54, 55 •Power Zoom Lever [T/W] ... •Speaker Volume Control [VOL.] ... •FOCUS Button ... •BLANK SEARCH Button ... •JUMP Button (GR-DVL817 only) ... •Stop Button [5] ... •NIGHT-ALIVE Button ... •Rewind Button [2] ... •EXPOSURE Button ... -
Page 80: Indications
LCD Monitor/Viewfinder Indications During Video Recording Only SOUND LCD Monitor/Viewfinder Indications During D.S.C. Recording Only (GR-DVL817 only) F I NE LP 50 3 4 5 6 10 / 100 INDEX Displays the selected Fade/Wipe effect. Appears when in the Squeeze or Cinema mode. - Page 81 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording Appears when the Power Switch is set to “ • : Appears when Night-Alive is engaged. • : Appears when “GAIN UP” is set to “AUTO” and the shutter speed is being automatically adjusted.
- Page 82 LCD Monitor/Viewfinder Indications During Video Playback SEARC LCD Monitor/Viewfinder Indications During D.S.C. Playback (GR-DVL817 only) BR I GHT DEC 25 ’01 Displays the sound mode. Displays the Blank Search mode. Displays the tape speed. Appears while a tape is running.
-
Page 83: Warning Indications
SNAPSHOT Button is pressed while the Power Switch is set to “ “ ” and the VIDEO/DSC Switch (GR-DVL817 only) is set to “VIDEO”. Appears when the tape ends during recording or playback. Appears if a tape in another format is loaded. -
Page 84: Index
When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer. INDEX Indications (cont.) ”... -
Page 85: Cautions
In case of connecting the unit’s power cord to an AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown. For this AC plug adapter, consult your nearest JVC dealer. Plug adapter Video Light DANGER The video light can become extremely hot. -
Page 86: Memory Cards
In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer. (cont.) - Page 87 Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from function- ing properly.
-
Page 88: Terms
Brighten The LCD Monitor ... Channels (Left/Right) ... Charge The Battery Pack ... Cinema ... Classic Film ... Clean The Camcorder ... Connections ... pg. 8, 9, 22, 23, 52, 53, 62, 68, 69 Darken The LCD Monitor ... Date/Time Display ... - Page 89 Picture Quality Mode ... Picture Wipe/Dissolve ... Playback Special Effects ... Playback Zoom ... Power Switch Position ... Printer ... Program AE With Special Effects ... Protecting Images ... Provided Accessories ... Random Assemble Editing ... Record-Standby ... Recording Mode ... Remote Control ...
-
Page 90: Specifications
: 83 mm x 97 mm x 188 mm (3-5/16" x 3-7/8" x 7-7/16") (with the LCD monitor closed and the viewfinder pushed down) : Approx. 610 g (1.4 lbs) (GR-DVL817/DVL517) Approx. 600 g (1.4 lbs) (GR-DVL515/DVL317) : 0°C to 40°C (32°F to 104°F) : 35% to 80% : –20°C to 50°C (–4°F to 122°F) -
Page 91: Specifications
For Digital Still Camera (GR-DVL817 only) Storage media Compression system File size Picture quality Approximate number of storable images with memory card [8 MB] (provided) FINE STANDARD with memory card [16 MB] (optional) FINE STANDARD with memory card [32 MB] (optional) - Page 92 VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD. 1200HOV...