JVC GR-DVL817 Instructions Manual page 23

1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration (
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF"
in the Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the
Menu Screen (
•Playback Sound Mode, Tape Speed And Tape
Running Displays for video playback
Or
Directory/File Names and Image Number/Total
Number of Images for D.S.C. Playback
(GR-DVL817 only)
.... set "ON SCREEN" to "LCD" or "LCD/TV" in
the Menu Screen (
Or, press DISPLAY on the remote control
(provided with GR-DVL817 only).
pg. 22).
pg. 50).
pg. 50).
pg. 50).
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack
( pg. 9).
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable.
Consult the JVC Service Center described on the
sheet included in the package for details on its
availability. Make sure to connect the end with a
core filter to the camcorder. The core filter
reduces interference.
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card*, set the camcorder's Power Switch to "
" ", then set your TV to the appropriate input
mode.
*
GR-DVL817 only
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
23
EN
" or