Playback Sound - JVC GR-DVL817 Instructions Manual

Menu Screen Explanations (cont.)
Each setting is linked with "
" SYSTEM", which appears when the Power
Switch is set to "
The parameters are the same as in the
description on pg. 48, 49.
pg. 28 – 36 (GR-DVL817 only)

PLAYBACK SOUND

During video playback, the camcorder detects the sound mode in which the recording was made, and plays
the sound back. Select the type of sound to accompany your playback picture. According to the menu access
explanation on pg. 50, select "SOUND MODE" or "12BIT MODE" from the Menu Screen and set it to the
desired parameter.
STEREO
SOUND MODE SOUND L
SOUND R
MIX
12BIT MODE
SOUND 1
SOUND 2
: Factory-preset
NOTES:
The "SOUND MODE" setting is available for both 12-bit and 16-bit sound. (In previous models' functions,
"12-bit" is called "32 kHz" and "16-bit" is called "48 kHz".)
The camcorder cannot detect the sound mode in which the recording was made during fast-forward or
rewind. During playback the sound mode is displayed in the upper left corner.
DISPLAY" or
" ( pg. 48, 49).
Sound is output on both "L" and "R" channels in stereo.
Sound from the "L" channel is output in stereo.
Sound from the "R" channel is output in stereo.
Original and dubbed sounds are combined and output in stereo on
both "L" and "R" channels in stereo.
Original sound is output on both "L" and "R" channels in stereo.
Dubbed sound is output on both "L" and "R" channels in stereo.
DISPLAY
ON SCREEN setting:
12B I T / SOUND1 SP 4
For playback sound, tape
speed and tape running
during video playback.
DATE/TIME setting:
DEC 2
DEC 25 '01 5 : 3
TIME CODE setting: For time code.
12 : 34 : 24
51
EN
6 100-0001
1 / 50
For directory, file name,
index number and total
number during D.S.C.
playback (GR-DVL817
only).
For date during D.S.C.
playback (GR-DVL817
only).
For date/time during
video playback.
5 '0 1
0 P M
Minutes
Seconds
Frames*
*30 frames = 1 second