Texas Instruments TI-89 Titanium User Manual page 652

Example
1. Type your script. Press „ and select
to mark the command lines.
1:Command
2. Press ... and select
3. Move the cursor to the first command line.
Then press † to execute the command.
Some commands take longer to
Note:
execute. Wait until the Busy indicator
disappears before pressing † again.
4. Continue using † to execute each
command, but stop just before executing
the Graph command.
5. Execute the Graph command.
In this example, the Graph
Note:
command displays the Graph screen in
place of the Home screen.
6. Press ... and select
to a full screen Text Editor.
Text Editor
.
1:Script view
to return
2:Clear split
649