Texas Instruments TI-89 Titanium User Manual page 547

Showing the List of Stat Plots
Press 8 # to display the Y= Editor. Initially, the nine stat plots are located "off the top"
of the screen, above the
information.
For example, PLOTS 23 means
that Plots 2 & 3 are selected.
To see the list of stat plots, use C to scroll
above the functions.
y(x)
If a Plot is highlighted, this shows
the data variable that will be used
for the plots.
If a Plot is defined, it shows the
same shorthand notation as the
Plot Setup screen.
From the Y= Editor, you can perform most of
the same operations on a stat plot as you can
on any other function.
y(x)
Statistics and Data Plots
functions. However, the PLOTS indicator provides some
y(x)
544