Saving And Opening A Graph Database - Texas Instruments TI-89 Titanium User Manual

Comments start with ¦. Press:
8 d
Due to its complexity, this program takes several minutes to run.
Note:
After entering this program on the Program Editor, go to the Home screen and enter
.
cyc( )

Saving and Opening a Graph Database

A graph database is the set of all elements that define a particular graph. By saving a
graph database as a GDB variable, you can recreate that graph at a later time by
opening its stored database variable.
Elements in a Graph Database
A graph database consists of:
• Mode settings (3) for
are using the two-graph mode).
All functions in the Y= Editor (8 #), including display styles and which functions
•
are selected.
Table parameters (8 &), Window variables (8 $), and graph formats:
•
ƒ
9
– or –
8 Í
Additional Graphing Topics
, ,
Graph Angle Complex Format
, and
Split Screen
(only if you
488