•
Execute a Graph command.
•
Open a different variable in the Data/Matrix Editor.
Copying a Plot Definition
From
:
Plot Setup
1. Highlight the plot and press „.
2. Press B and select the plot number that
you want to copy to.
3. Press ¸.
If the original plot was selected (Ÿ), the copy is also selected.
Note:
Clearing a Plot Definition
From Plot Setup, highlight the plot and press .... To redefine an existing plot, you do not
necessarily need to clear it first; you can make changes to the existing definition. To
prevent a plot from graphing, you can deselect it.
Statistical Plot Types
When you define a plot as described in the previous section, the Plot Setup screen lets
you select the plot type. This section gives more information about the available plot
types.
Statistics and Data Plots
539