User Maintenance - JVC GR-DV3000A Instructions Manual

80
EN
After Use
1
Turn off the camcorder.
2
Slide and hold OPEN/EJECT in the direction of
the arrow, then pull the cassette holder cover open
until it locks. The cassette holder opens automatically.
Remove the cassette.
3
Press "PUSH HERE" to close the cassette holder.
• Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely before
closing the cassette holder cover.
4
Slide BATT. RELEASE
2
pack .
PUSH HERE
Remove.
OPEN/EJECT
Switch
Cassette
holder cover
1
2
1
and remove the battery
Cassette holder
BATT. RELEASE Switch
Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry cloth.
2
Press PUSH OPEN and open the LCD monitor.
Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
To clean the viewfinder, raise it to the vertical
position. Carefully lift the plastic tab on the bottom of
the viewfinder, and open the hatch
5
Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the interior of
2
the viewfinder with it
6
Close the hatch. Tilt the viewfinder back to the
horizontal position and push it back in.
NOTES:
Avoid using strong cleaning agents such as benzine or
alcohol.
Cleaning should be done only after the battery pack
has been removed or other power units have been
disconnected.
Mould may form if the lens is left dirty.
When using a cleaner or chemically treated cloth refer
to the cautions of each product.
1
Hatch

USER MAINTENANCE

1
.
.
2
Lens blower