Recording Mode Setting - JVC GR-DV3000A Instructions Manual

Power Switch
Power Lamp
Lock Button
MENU Wheel
Display
REC MODE – SP
LP
Menu Screen
Sub Menu

Recording Mode Setting

Set the tape recording mode depending on your
preference.
1
Set the Power Switch to "
down the Lock Button located on the switch, and
open the LCD monitor fully or pull out the viewfinder
fully. The power lamp lights and the camcorder is
turned on.
2
Press the MENU wheel in. The Menu Screen
appears.
3
Rotate the MENU wheel to select "
and press it. The CAMERA Menu appears.
4
Rotate the MENU wheel to select "REC MODE"
and press it. The Sub Menu appears. Select "SP" or
"LP" by rotating the MENU wheel and press it. Rotate
the MENU wheel to select "
it twice. The Menu Screen closes.
• Audio Dubbing ( pg. 72) and Insert Editing
( pg. 71) are possible on tapes recorded in the SP
mode.
• "LP" (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
15
EN
" while pressing
CAMERA"
RETURN", and press