Using The Camcorder As A Webcam - JVC GR-DV3000A Instructions Manual

VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
To USB
USB cable
(provided)
To USB
connector
USB-equipped PC
Display
Power Switch
W W e e b CAMERA b CAMERA

Using The Camcorder As A WebCam

This camcorder can be used as a WebCam via USB
connection.
1
Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2
Connect the camcorder to your PC using the USB
cable.
3
Set the VIDEO/MEMORY Switch to "MEMORY"
and set the Power Switch to "
on the PC.
• "Web CAMERA" appears on the screen.
• If the PC is not powered on, the camcorder does not
enter the Web Camera mode.
4
When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one
or more core filter. If a cable has only one core filter, the
end that is closest to the filter should be connected to
the camcorder.
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack ( pg. 9).
Use the provided software PIXELA ImageMixer to
capture video in real-time.
You can also use the camcorder for webconference by
®
using Windows Microsoft Netmeeting and signing up
for Microsoft Hotmail.
In the Web Camera mode, the following buttons cannot
be operated: TITLE, E-MAIL, SNAPSHOT, the
Recording Start/Stop button.
Refer to the instruction manuals of the PC and
provided Software.
57
EN
" or " ", then turn