Automatic Demonstration - JVC GR-DV3000A Instructions Manual

Automatic Demonstration takes place when "DEMO
MODE" is set to "ON" (factory-preset).
Automatic Demonstration starts when there is no operation for
about 3 minutes after the Power Switch is set to "
no cassette is in the camcorder.
Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will resume.
"DEMO MODE" remains "ON" even if the camcorder power is
turned off.
To cancel Automatic Demonstration:
1. Set the Power Switch to "
Button located on the switch and press the MENU wheel in.
The Menu Screen appears.
2. Rotate the MENU wheel to select "
The SYSTEM Menu appears.
3. Rotate the MENU wheel to select "DEMO MODE" and press
it. The Sub Menu appears.
4. Rotate the MENU wheel to select "OFF" and press it.
5. Rotate the MENU wheel to select "
twice. The normal screen appears.

AUTOMATIC DEMONSTRATION

" while pressing down the Lock
SYSTEM" and press it.
RETURN", and press it
" or " " and
EN
MENU Wheel
DEMO MODE – OF F
ON
Sub Menu
7