Paper Mode; Warm-Up Time - Dell 5110cn Service Manual

4.9 Paper Mode

8 paper modes are available for this printer. Modes are switched over under the instruction from the
controller.
Classification of paper mode
(1) Plain paper-L mode
(2) Plain paper-H mode
(3) Plain paper-H' mode
(4) Thick paper-L mode
(5) Thick paper-H mode
(6) Label-L mode
(7) Label-H mode
(8) OHP mode
(9) Envelop mode
(10) Postcard mode
(11) Coated paper-L mode : It is selected to run on the coated papers whose thickness is 60-
(12) Coated paper-H mode : It is selected to run on the coated papers whose thickness is 106-
(13) Coated paper-H' mode : It is selected to run on the coated papers whose thickness is 164-
Relation between the resolution, process speed, print mode and paper mode is shown in the table
below.
Correspondence media mode
Plain paper (1)
Thick/Special
paper (2) - (13)

4.10 Warm-up Time

When the nominal voltage (100 V, 120 V or 220 V) is applied, the FUSER standby temperature should
be reached within the time stated below.
• From the moment of POWER ON to the start of Standby mode: 10 seconds or less
• When a mode change command is received from IOT during the Power Save mode: 35 seconds or
less
Reference: Excluding the period of time required to adjust the color registration.
: Plain paper such as FX-P, R, J/JD (for Japanese) whose thickness
is 60-80 gsm.
: Plain paper such as XC-4200 20lb, 24lbs RX-80, 90 (for overseas)
whose thickness is 65-105 gsm.
: Plain paper such as XC-4200 20lb, 24lbs RX-80, 90 (for overseas)
whose thickness is 24lb-28lb.
: it is selected to run on the papers whose thickness is 106-163
gsm.
: It is selected to run on the papers whose thickness is 164-216
gsm.
: It is mainly selected to run on Japanese labels (V860 etc.).
: It is mainly selected to run on labels (3R4469 etc.).
: It is selected to run on OHPs (V516 etc).
: It is selected to run on envelops.
: It is selected to run on postcards.
105 gsm.
163 gsm.
216 gsm.
Print mode
B/W full speed mode
Color full speed mode
Color / B/W medium
speed mode
Color / B/W low speed
mode
8 – 9
Chapter 8 Printer Specifications
Process direction resolution/
Process speed
B/W
600dpi
264mm/s
-
132mm/s
88mm/s
Color
600dpi
-
225mm/s
132mm/s
88mm/s