Chapter 3 Removal And Replacement Procedures (Rrps) Contents - Dell 5110cn Service Manual

RRP4.5 MULTIPURPOSE FEEDER (MPF) SEPARATOR ASSEMBLY (PL4.1.13),
MULTIPURPOSE FEEDER (MPF) SEPARATOR ROLLER (PL4.1.16)
[Removal]
1) Release the latch and open INNER DUPLEX ASSEMBLY (PL5.2.1).
2) Remove TRANSFER ROLLER. (RRP5.2)
Before starting the following work, cover the entire DEVELOPER ASSEMBLY with paper
or the like so as to prevent toner in DEVELOPER ASSEMBLY from adhering on your
clothing.
3) Turn MULTIPURPOSE FEEDER (MPF) SEPARATOR ASSEMBLY upward.
4) Release the hook that fixes SHAFT RETARD to HOLDER RETARD, remove SHAFT
RETARD with MULTIPURPOSE FEEDER (MPF) SEPARATOR ROLLER attached.
5) Pull out MULTIPURPOSE FEEDER (MPF) SEPARATOR ROLLER and CLUTCH ASSY
FRICTION from SHAFT RETARD and remove.
[Replacement]
1) Insert CLUTCH ASSY FRICTION into SHAFT RETARD.
2) Insert ROLL ASSY FRICTION into SHAFT RETARD to engage with CLUTCH ASSY
FRICTION.
3) Attach SHAFT RETARD to HOLDER RETARD by locking the hook.
4) Turn MULTIPURPOSE FEEDER (MPF) SEPARATOR ASSEMBLY forward.
Be sure to remove the paper covering DEVELOPER ASSEMBLY.
5) Attach TRANSFER ROLLER. (RRP5.2)
6) Close INNER DUPLEX ASSEMBLY.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 87