Changing The Power Saver Timeout; Saving Paper And Energy With Eco-Mode - Dell All-in-One Wireless Printer V715w User Manual

Use
2-Sided/Eco Mode Activate 2-Sided to:
6
7 Cancel
Keypad
8

Changing the Power Saver timeout

The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left
idle. The Power Saver feature optimizes energy efficiency by reducing the printer power consumption (as much as
28 percent on some printer models) compared to the default printer settings. To save the most energy, select the
lowest Power Saver timeout.
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Device Setup, and then press
3
Press the up or down arrow button to scroll to Power Saver, and then press
4
Press the up or down arrow button to select a Power Saver timeout, and then press

Saving paper and energy with Eco-Mode

The Eco-Mode feature significantly cuts paper usage, reduces paper waste, optimizes energy efficiency, and saves
money.
Note: If you are using Eco-Mode, then the Eco-Mode settings override any changes you may make to individual
settings that are part of Eco-Mode.
When Eco-Mode is enabled, the printer automatically switches to the following settings:
•
The printer display is dimmed.
•
The printer changes to Power Saver mode after ten minutes.
•
The printer prints on both sides of the paper (duplex) for copy and fax jobs, and for printing in Windows (selected
models only).
To
•
Print on both sides of the paper (duplex).
Activate Eco-Mode to:
•
Print on both sides of the paper (duplex).
•
Change to Power Saver mode after the printer is left idle for ten minutes.
•
Set screen brightness to low.
•
Cancel a print, copy, scan, or fax job in progress.
•
Exit from a menu level of the Copy, Scan, Fax, Photo, or File Print menu to the top level
of a menu.
•
Exit from a menu level of the Setup menu to the top level of the previous mode.
•
Clear current settings or error messages, and return to default settings.
In Copy mode or Photo mode: enter the number of copies or prints you want to make.
In Fax mode:
•
Enter fax numbers.
•
Navigate an automated answering system.
•
Select letters when creating a Speed Dial list.
•
Type numbers to enter or edit the date and time shown on the display.
.
Using the printer control panel buttons and menus
15
.
.
.