Changing The Plug - Salton SFMK02 Instructions And Warranty

 You have followed the instructions correctly
 That the unit has been wired correctly and that the wall socket is switched
on.
 That the mains power supply is ON.
 That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve
the problem and you need to return the appliance, make sure that:
 The unit is packed carefully back into its original packaging.
 Proof of purchase is attached.
 A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an
authorised service agent, in order to avoid any hazard. If service becomes
necessary within the warranty period, the appliance should be returned to an
approved Tedelex Trading (Pty) Limited service centre. Servicing outside the
warranty period is still available, but will, however, be chargeable.

CHANGING THE PLUG

Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the advertised current. Connecting to other
power sources may damage the appliance. Connect a three-pin plug as
follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue = Neutral
Brown = Live
16