Important Safeguards; Polarized Plug - Salton RST-18 Quick Start Manual

Table of Contents

Advertisement

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions.
2. Place the roaster oven on a flat heat resistant surface and use in a well-ventilated
area.
3. Do not put water or other liquid into, or cook food in the Base/Heating Well. Cook
only in the insert pan or other pans that are placed inside the insert pan.
4. Do not touch hot surfaces. Use pot holders or oven mitts when holding handles. Do
not move the heated roaster oven.
5. When lifting or removing lid, avoid the vent holes on the lid and tilt the lid away to
divert the escaping steam.
6. To protect against electrical hazards, do not immerse cord, plugs, or the appliance in
water or other liquid.
7. Close supervision is necessary when any appliance is used by or near children.
8. Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts, and before cleaning the appliance.
9. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to Salton for
examination, repair or adjustment. See Warranty.
10. The use of accessories or attachments not recommended by Salton may cause
hazards.
11. Use inside or in a covered outside area.
12. Do not let cord hang over edge of table or counter, or touch hot surfaces.
13. Do not place on or near a hot gas or electric burner, or in a heated oven.
14. Prior to connecting or disconnecting plug from wall outlet, turn any control to 'Off'.
15. This appliance is for Household Use Only. Do not use appliance for other than its
intended use.
16. Do not leave unit unattended while in use.
SAVE THESE INSTRUCTIONS

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
2

Advertisement

Table of Contents
loading

Table of Contents